PurplePixie
s or a similar phrase instead. 7 Wait for your router to finish applying changes and reboot. When you next attempt to join the wi reless network using your computer, you will be asked to enter a password. Enter the password that you previously entered, and you r computer will successfully connect to the wireless network.1 Click the Start button on your computer's desktop to launch the S tart menu. 2 Type cmd in the textbox located in the Start menu and press the Enter key on your keyboard. This will launch the co architecture models mmand-prompt window. 3 Type slmgr.vbs dlv in the command-prompt window and press the Enter key on your keyboard. If you have a genuine copy of Windows, the software licensing status will appear in a new window. If you do not have a genuine copy of Windows, PurplePixie you will get an Access denied error instead. 4 Right click Computer from the Start menu and choose Properties from the menu. .
If you purchased your wireless modem used and do not have the CD, visit the D-Link support website using the link in the Resource s section of this article to download the drivers for your product. The setup software will launch automatically. 2 Click Next to continue. 3 Click Browse and choose a folder for the D-Link software to be installed in, or keep the default folder and click Next. 4 Click Next after choosing the folder on your Start menu that the D-Link software should be placed in. 5 Insert the D- font styles Link wireless modem into your computer when prompted by the software. In certain versions of Windows, you may see a pop-up window labeled New Hardware Wizard. Hit Cancel to close the New Hardware Wizard and return to the D-Link installation. Click Next. PurplePixie The software will finish installing, and the Windows wireless connection manager will appear in your system tray. 6 Right click on .
nd disconnect the power cord. 2 Open the cover and remove the lead that connects the power switch to the motherboard. 3 Insert the positive lead of the multimeter into one side of the connector and insert the negative lead into the other side of the connector. Be careful not to touch the two leads together. 4 Set the multimeter to the resistance Ohms measurement at the lowest setting. 5 Press the button and hold it for about three seconds. Watch the indicator on the multimeter to see if a change is noticed in the house icon resistance. 6 Replace the switch with another one if the switch does not register a closed circuit when pressed. Test the Motherb oard Power Leads 7 Connect power to the power supply. 8 Small gold header pins connect the motherboard to the power switch. Align PurplePixie a small metal screwdriver tip to touch both of the small header pins on the motherboard that connect to the power switch lead. 9 T .
