PurplePixie
ection tab. In addition, youll need your DSL account name and password, which were assigned by your DSL provider. 5 Check that you are indeed connected to the appropriate network. One common problem with wireless users is that they inadvertently connect to ano ther unsecured wireless network that happens to be within range.1 Read the motherboard manual and look under the frequently asked questions or troubleshooting pages. There should be a list of beep codes that may show what the problem is. You can also try looki marble texture ng at the motherboard's website for information. 2 Check the monitor to see if it is plugged in correctly and is not loose. Most c omputers make some kind of a normal beep at startup. You just may not be seeing the screen because there is an issue with the moni PurplePixie tor. 3 Open the computer case by unscrewing the access door from the back of the case. Check any hardware, especially the video ca .
. Disconnect the power supply and the hard drives from the motherboard. Unscrew the CPU fan and heat sink, and lift the processor bar to remove the CPU. Push the side tabs on the RAM and lift the RAM out. Unscrew the motherboard and remove it from the case. Re place it with a new motherboard, and put everything back in place.Installing the SATA Card 1 Turn off your computer. Disconnect al l of the cables, and place it on a large flat surface. 2 Remove the side cover of the computer, and set it aside. 3 Using the Phil free 3ds lip's screwdriver, remove one of the metal covers that protects the motherboard's PCI slots. 4 Insert the SATA add-on card into th e PCI slot. Make sure it is properly seated. 5 Using the screw from the metal cover, fasten the add-on card into place. Installing PurplePixie the Hard Drive 6 Insert the SATA hard drive into an available hard drive cage. 7 Use the included screws to fasten the hard drive .
to-SATA adapter into the hard drive. Closing Up 11 Replace the computer's side cover. 12 Reattach all of the cabling to the comput er. 13 Start up the computer. 14 Once your operating system has booted, it should automatically detect the new hardware. If it ask s for drivers, insert whatever media came with the SATA add-on card. 15 If the new drive is unformatted, your operating system wil l ask if you want to format it. Allow it to do so.1 Insert the USB wireless adapter into the machine. If the machine is on, the op Flat Belly Diet erating system will automatically detect the new hardware. 2 Insert the CD or DVD for the manufacturer's drivers. Follow the promp ts to install the drivers onto the computer. 3 Double-click the wireless icon that appears in the taskbar. If you are using a Vist PurplePixie a machine, click the link that displays Connect to a Network. 4 Select a wireless network to connect the computer with. If a pas .
