PurplePixie
es text box. A command-line interface window appears. At the prompt in the window, type ipconfig and then press enter. Your IP address will be four numbers separated by periods, in the form XXX.XXX.XXX.XXX. Some of the numbers may be less than three digit s long. Write down this number. 3 On your remote computer, click the Start button. Click on All Programs and then Accessories. and select Remote Desktop Connection. Alternatively, you can type mstsc in the Search programs and files text box that a google fonts ppears when you press the Start button. In the Remote Desktop Connection window, type the IP address in the Computer: text box.1 Take a screwdriver and unfasten the screws that are holding the side panels up from the back of the computer case. Remove the sid PurplePixie e panels and lay the computer case onto its right side, so that the computer internal are facing you. 2 Locate the hard drive bays .
he drive in the bay. Remove the ATA drive. 4 Take your SATA hard drive and put it into a hard drive bay in your computer. Fasten t he two screws to the side of the hard drive and check if it is firmly installed. Take the cable that came with the SATA hard drive and connect it to the motherboard. Note that you need a motherboard that supports SATA technology to do this. Check your motherbo ard for SATA ports to see if it is compatible first picture in Resources. 5 Attach the power connector from the power supply to mail icon the SATA hard drive and then close the case by replacing the side panels. 6 Turn on your computer and then access My Computer. Y ou should see a new hard drive in the Hard Disk Drives section.1 Click Start and type Command Prompt. 2 Click the Command P PurplePixie rompt option in the search results. 3 Enter the text msiexec ? and press Enter. The first line will display the version of t .
u may need to remove a piece of your computer's chassis or bezel to do this; refer to the manual that came with your computer's ca se. Screw the drive in securely using the screws provided with the drive. 4 Connect the drive to your computer's power supply usin g one of the built-in wires. Don't push too hard--it should connect easily if you're plugging it into the correct port. 5 Connect the drive to your computer's motherboard using the SATA cable. Again, this should connect easily. 6 Close your computer, plug it b timeline template ack in and turn it on. Your operating system should recognize the new drive.1 Click Run in the Windows Start Menu, type cmd in the field, then click OK to open the Windows Command Line. 2 Type diskpart in the command line then press Enter to open a new window PurplePixie for DiskPart. Wait for the prompt DISKPART to appear before continuing. 3 Type list disk then press Enter to generate a list of th .
