PurplePixie
nt under the list, and change the following settings: On the IP Address tab, use the drop-down and choose Obtain an IP Address Au tomatically. Move to the the WINS Configuration tab, and select Use DHCP for WINS resolution. Click the Gateway tab, and verify that all fields are empty. Under DNS Configuration, select Disable DNS. Go to the Bindings tab, and make sure all items listed are checked. Finally, for the Advanced tab, set the value of Allow binding to ATM to No, and ensure there is a check in the bo 3d cartoon x next to Set this to be the default protocol. 5 Click OK. 6 Verify both File and Print Sharing are selected and press OK once more. The computer may ask you to restart; allow it to do so. 7 Open the Wireless adaptor client or the Network Connections s PurplePixie creen on your computer. If there is a task tray icon with the image of one or two blinking computer screens, try clicking or right .
select and click connect, to choose and connect to a wireless network.1 Disconnect all devices from your computer, except for the USB sound card that you are trying to troubleshoot. Unplug the mouse, external storage, network adapters and printers if they are connected. 2 Listen to see if this has resolved the issue. If not, continue on to step three. If the problem is resolved, then yo u have identified the devices that are causing an issue. Contact the manufacturer of the device that is causing the 60Hz cycling, Eat clean diet because they may request that you send the equipment to them directly for repair. 3 Unplug the computer's AC cable if you are usin g a laptop. Using battery power can isolate the problem by eliminating the flow of power that may be causing the cycling sound. If PurplePixie you are using a desktop computer, power off and unplug the monitor. If this resolves your problem, then your grounding issue lies .
eakers. 5 Take note of any changes to the level of undesirable hum that follow unplugging all of your devices. If any of these dev ices have been determined to be the culprit, you must lift the ground with the 3-to-2-prong adapter. Lifting ground is a technique that eliminates ground hum by interrupting the ground loops between multiple electrical devices. Connect the 3-prong-to-2-prong a dapter to the device's AC cable, which has been identified as the source of the 60 Hz hum by process of elimination mentioned in t 3d cartoon he above steps. If you are still experiencing hum through your USB device, you will need to contact the manufacturer to have the e quipment serviced. There may be a wiring defect in the circuitry, and home repair may void your warranty.Windows 1 Click on the S PurplePixie tart menu and access the All Programs tab. 2 Click on the Accessories in the All Programs list. Open the Command Prompt f .
