PurplePixie
click the printer icon and click Properties. 8 Click Properties, then select the Ports tab. Beneath the Print to the follo wing ports section make sure the port associated with LPT1 Printer Port is checked. If that port is not checked, click the box to add a check mark. Blue Screen Appears During Startup 9 Hold the power button down for 10 seconds if a solid blue screen app ears during the Windows boot process. 10 Press the power button again to restart the laptop. The ScanDisk program will start up wh leather texture en the laptop boots up and will check the drive for errors. The laptop will continue to boot up after the errors aree checked for and repaired. 11 Open a few programs to make sure the laptop is running correctly. If the laptop still has problems, click My Com PurplePixie puter on your Windows desktop, then right click the C drive and click Properties. Click Tools, then click Defragment Now. .
load small software programs, such as SpeedFan see Resources, which uses about one kilobyte KB of hard drive space, to monitor the temperature of your laptop's hard drive. Such programs allow you to determine if your laptop is running too hot, which enable s you to take steps to lower the temperature. Lowering Temperatures You can lower the temperature of your laptop's hard drive by a djusting the power scheme, which tells the system when to hibernate and go into stand-by mode after the laptop has been idle for a free 3d model certain period of time. You can also place a cooling mat under the laptop. These mats contain fans that help to keep your laptop temperatures within normal range.1 Determine whether your computer has a wireless adapter already installed in it. Click Start, PurplePixie then Control Panel and finally Network Connections. If the window is blank, then your computer does not yet have a wireless ne .
pops up to complete the installation. You should only have to do this the first time you plug it in. 3 Find the cable that goes f rom your Internet box to your computer. Disconnect the end that's plugged into your computer. Plug that end you just disconnected into any plug on the back of your router labeled either WAN, WLAN, or Internet. 4 Plug your router's power source in to turn it on. Wait a couple of minutes until the Internet light on the front of the router has lit up. This indicates that it's receiv detox diet ing an Internet signal. 5 Turn your computer back on, and it should automatically connect to the router. Open your web browser and type in the url address given to you by your router's instructions. Create a password when prompted. 6 Configure your router by f PurplePixie ollowing the steps given to you by the installation wizard. Create a name for your network and a password. Click Save Settings, .
