PurplePixie
er should have an IP address associated with it and should be able to reconnect to the Internet. Type ipconfig to verify that yo u have an IP address assigned to your computer before closing the command prompt window.1 Decide what computers you intend to use with the portable hard drive and use a system profiling program such as Belarc Advisor on each one to identify the version of USB or FireWire that they support. 2 Locate and purchase a 2 12-inch hard drive conversion kit that will connect to your profiled com free website design puters. These kits are available from local Best Buy, Radio Shack and others and online retailers Amazon.com, MicroCenter.com a nd others, as well as directly from kit manufacturers and wholesalers Directron, Addonics, Belkin. 3 Put on an anti-static wris PurplePixie t strap, ground the clip end on something metallic and discharge any static electricity in your work area. 4 Follow the kit instru .
computer will automatically recognize the external drive and install the driver for its use.1 Unscrew the screws holding the side panels to the back of your computer with the screwdriver, if applicable. Take off the side panels to expose the inside of the com puter. 2 Place the IDE optical drive into one of the 5.25-inch drive bays see Resources. 3 Attach the IDE ribbon cable see Reso urces to the back of the optical drive. 4 Locate the IDE connector on the motherboard see Resources and connect the IDE ribbon leather texture cable to it. 5 Turn on your computer and test the drive by pushing the eject button a few times. If the drive works, reattach the side panels to the back of the computer.Display Is Blank 1 Press the power button if the light around the button is on to wake it PurplePixie up from Standby Mode. Hold the power button down for 10 seconds if the computer doesn't wake up, remove the battery, then place th .
ly plugged into and plug it into another outlet, then turn the laptop on. If the monitor is still blank, proceed to Step 3. 3 Chec k the AC adapter cord and make sure the power light on the box in the middle of the cord is on. If the light is not on, replace th e AC adapter cord and turn the computer on. If the monitor is still not working, proceed to Step 4. 4 Press Fn and F8 at the s ame time to make sure the buttons weren't pressed previously and the laptop isn't trying to send the screen image to an external d free 3d model evice. If the display doesn't appear back on the laptop monitor, press Fn and F8 at the same time again to make sure the displ ay is set to appear on the laptop. 5 Replace your laptop monitor with a new monitor. Laptop Won't Recognize Printer 6 Click Start PurplePixie , then click Control Panel. 7 Click Printers and Other Hardware, then select View installed printers or fax printers. Right .
