PurplePixie
set up the program. Under the General tab, check the box to Allow device to receive fax calls and Allow device to send fax ca lls. 5 Click Automatically answer after X rings, and enter the number of rings you'd like the program to wait before kicking in , if you'd like the program to function automatically. Click OK. 6 Click Manually answer if you'd like to manipulate the progr am yourself. Click OK. If you are expecting a fax when the phone rings, click Start All Programs Windows Fax and Scan Fax Recei 3d model ve a Fax Now to accept the call as a fax transmission. 7 Monitor the progress of a fax by adjusting settings under the Tracking tab. Set redial rules under the Advanced tab, and set access rights for various users under the Security tab.1 Check that all PurplePixie cable connections have been made properly. Make sure that the second monitor's AC cable has been connected securely and that the .
tion. Click on Display Settings from the list of options on the Personalization screen. 3 Click on the second monitor icon, w hich will highlight options to either extend the screen onto the second monitor, or to choose the second monitor as the default. C hoose one these options by placing a check mark next to the box field. You will have to select the option to extend the screen in order to make the main monitor option available. 4 Click on the Identify Monitors button at the top-right of the Display Settin tattoo font gs screen. This will send a signal to the external monitor, and either a one or a two will appear, depending on your desired choice of a main monitor in the earlier step. 5 Click Apply to save the settings that you have made. You will then be asked whet PurplePixie her you want to keep these settings. Answer Yes if you are content with the current settings within 12 seconds, otherwise they w .
ely measured wire that is a specific percentage of the radio waves of the 2.4Ghz radio frequency signal. 2 Clean the Pringles can using soap and water. 3 Measure precisely one inch up the outside of the can from the can's closed end. 4 Punch an opening in the can at the point of your measurement, gently using a nail or screw. The final size of the opening will depend on whether a compres sion or screw-on N-connector is used. 5 Measure the 12-gauge wire. Get as near to 1.21 inches as possible. The objective is a quar star png ter wave length, and too long a length inhibits good reception. 6 Solder the length of 12-gauge wire to the solder end of the N-co nnector that extends into the Pringles can. 7 Attach the assembled N-connector to the Pringles can. The wire end goes in the can. PurplePixie If using a screw-on connector, connect the screws from inside the can with the bolts on the outside of the can. If using a compres .
