PurplePixie
drive and insert your USB flash drive into a free USB port on your computer. 2 Open the command prompt. Type diskpart then pres s Enter. Type list disk then press Enter. You'll see a list of all the drives connected to your computer. Find your flash dr ive in the list, using its storage capacity as a clue. Note the number next to the flash drive's entry on the list. 3 Type select disk #, with the flash drive's number from Step 2 replacing #. Type clean then press Enter. Type each of the following com free websites mands, one at a time, pressing Enter each time: create partition primary, select partition 1, active, format fs=fat32, assign then exit. 4 Type xcopy d:*.* sef g: at the Command Prompt, substituting the letter of your optical drive for d a PurplePixie nd the letter of your flash drive for g. Press Enter then let the files copy to your USB drive. Macintosh 5 Insert your bootab .
ntel-based Macintosh, you should choose GUID Partition Table. 8 On the Disk Utility main screen click Erase. Choose the opti on from the Volume Format menu appropriate to the version of Mac OS you are using, then click the lower Erase button. 9 Click Restore. Drag the icon representing your CD or DVD to the Source box, then drag the icon representing your flash drive to the Destination box, then click Restore. When the process has finished, your flash drive is bootable.1 Connect the device to the c paper texture omputer using its USB cable. Windows Mobile Center automatically boots up to handle the device. 2 Click Mobile Device Settings. 3 Click the item labeled Change the Connection Settings. 4 Choose Automatic to use the default settings for network connectivi PurplePixie ty. Choose to specify the device connection if you have multiple connections to the Internet and require a specific one to be conf .
ilar to 192.168.1.240. 4 Verify that the range extender's IP address is in the same network as the wireless network. Click Start, then Run. Enter cmd and press Enter. Enter ipconfig and press Enter. The information displayed is the network information fo r the wireless network. Enter this information into the range extender's interface. The first three numbers of the IP address shou ld be the same for instance 192.168.1.X and the last number can be anything under 254. 5 Click to the wireless settings and ente glock models r the SSID network name of your network. If your network has a security password, enter it in the wireless settings. 6 Save the range extender's settings, then click Save. 7 Unplug the Ethernet cable from the WAN port of your wireless router. This will cut PurplePixie your network from the Internet but still allow the wireless extender to connect.1 Determine the coverage area of your network. Do .
