PurplePixie
ction, use an Ethernet cable to connect your computer to the router. 2 Open an Internet browser and navigate to your router's dash board. If you're connected to your NETGEAR router, it will prompt you for a username and password. Enter the administrative userna me and password you created when you first set up your router. 3 Select Setup from the router's navigation menu. Click on the W ireless Settings link. 4 Copy the text in the text box labeled Passphrase. The passphrase is your router's security key. The pa vector icons ssphrase is listed under the Security Options section of the Wireless Settings page. 5 Give the passphrase to any user you wan t to allow onto your wireless network.1 Turn off your computer and unplug it from the power outlet. Remove the side case of the co PurplePixie mputer and set the computer down on a flat, level surface. Put on your anti-static wristband. 2 Take your IDE hard drive and place .
ive. 3 Attach the SATA power cable to both the hard drive and to a free IDE power cable that is coming out of the computer's power supply unit PSU. Attach the SATA data cable to both the hard drive and to the motherboard on the computer. 4 Re-attach the side of the computer, plug it in and power it on. If the installation was successful you will see the hard drive once you boot into th e operating system. If the hard drive does not appear once you've logged in, check that all of your connections are secure and tha letter format t no wires are loose or damaged inside the case.1 Visit the Dragon NaturallySpeaking upgrade link See References. Use the link f or the version of Dragon NaturallySpeaking 9 that you have. 2 Provide your name, email address and Dragon serial number. The seria PurplePixie l number is included with your Dragon NaturallySpeaking 9 installation media. 3 Click Continue to verify your number. You will n .
it to your desktop and double-click the file to open it. 6 Enter your user name, company name if any and serial number when prom pted by the installation. 7 Review the install configuration and click Install to begin the installation process. 8 Click Finis h when the installation wizard tells you it has completed.1 Plug the CAT-6 cable into your computer's Ethernet port, and plug the other into the wireless range extender. Boot up your computer and plug in the extender. 2 Open a web browser and type in the IP a free books ddress provided by your wireless range extender. Example: 192.168.0.1. You will be able to find this in the extender's manual. 3 In the setup menu of the extender, you will be asked to locate your wireless network. Do so, and provide the password to your net PurplePixie work if necessary. You will need to know what type of encryption your password is, for example WEP. If you don't know, check your .
