PurplePixie
he Browse For Folders button and select the Maildir folder. Click Next. 4 Select In the original location and click Restore to restore the Maildir folder to your computer.1 Backup your computer operating system and data using drive image or disk clone software. Creating a disk image will ensure all operating system and program settings are preserved. 2 Remove the cover to your co mputer. If you are replacing an existing drive, continue to the next step. Otherwise, proceed to step 4. 3 Remove the existing har 3d models d drive by using a Phillips screwdriver to remove the screws holding the drive in place. If your computer model uses a tool-free m ount, depress the retention clips and pull the drive out. 4 Examine your computer chassis for an available drive bay. If replacing PurplePixie an existing drive, use the drive bay of the drive you removed; otherwise, locate a slot adjacent to the primary hard drive. 5 Ins .
Attach the SATA connection cable from the SATA controller card or main board to the end of the hard drive where the connectors ar e located. 7 Attach the SATA power connection cable from the computer power supply. Depending on your SATA drive, the unit may acc ept older-style 4-pin Molex power connectors. If not, you will need a 4-pin Molex to SATA adapter plug. 8 Boot your computer using the system restore disk provided by the backup software. If you are adding a second drive, boot the computer normally. Confirm th typewriter font e computer BIOS recognizes the new drive. The drive information should be displayed briefly on start up if the BIOS properly detec ts the drive. 9 Restore the drive image to the replacement SATA drive, if you have replaced the primary drive. The drive will be f PurplePixie ormatted by the disk restore software prior to copying the stored drive image. Otherwise, use the operating systems disk managemen .
Uncheck This key is provided for me automatically. Fill in the SSID field with the chosen network name, and create a password in the Network key text box. Click OK. 6 Go to any computers that will be sharing the wireless Internet connection provided b y the laptop. Windows will automatically detect the networks and display a connection icon in the system tray. Right-click the wir eless icon, and choose View Available Wireless Networks. 7 Choose the wireless network that you set up earlier, and hit Connect video icon . Enter the network key, and hit Connect.1 Shut down the computer and remove all the cables connected to the back. Unscrew the Phillips screws around the edges of the computer case, using the screwdriver. 2 Slide the computer case off to expose the insides PurplePixie of the computer. The card slots are found at the rear of the computer. 3 Find the motherboard the large computer circuit board. .
