PurplePixie
ilize, the router will be broadcasting a signal. 4 Run your operating system's network connection wizard. The wizard will give you the option to connect to a wireless network; simply follow the on-screen prompts. If the wizard doesn't give you a wireless optio n, finish the wizard in order to set up your network preferences and then right-click on the wireless icon in your system tray. Se lect Connect to a Wireless Network the exact text may differ from the menu that opens. 5 Log in to the router using the IP add does weight watchers work ress provided with the router's setup guide in order to set the router's wireless Internet options. This will give you an opportun ity to create an encrypted security key which you will need to input on your computer by going through the Connect to a Wireless PurplePixie Network step again; you will be prompted for the security key this time before you will be allowed to connect. You can also set .
ur security key on each computer, so make sure that you have it written down.1 Attach the mounting kit to your notebook drive. Not ebook drives come in a 2.5-inch size that is too small to be mounted in a desktop computer unless you use this kit. Sometimes this kit is referred to as a mounting bracket. The kit should come with the proper size screws, plus a power adapter and a cable adapt er. The power adapter converts the notebook drive's connector about the same size as used for a floppy drive or fan controller t Wheat Belly o a full-size Molex connector that is compatible with desktop power supplies. The notebook drive's data port is usually smaller th an a desktop drive's data cable, so you'll need an IDE cable converter there too. 2 Turn off the computer and detach its power cab PurplePixie le. Whenever you are accessing the inside of a computer or other electronic device, it is very important to unplug it to avoid pot .
f the way. Make a note of where this fan's cable was attached, so that you can put it back in the same place later. Examine the dr ive bay and verify that there is a spare slot for the notebook drive. If the drive bay is not detachable, then you will need to re move the case door on the other side to reach the other side of the drive bay. 4 Insert the notebook drive in the drive bay. Line up the screw holes on the drive's mounting kit to the screw holes in the drive bay slot. Four screws two on each side will be fi Dr. Andrew Weil ne. If the screw appears to be too large to fit, then do not force it. Try smaller screws instead. 5 Attach the power adapter to t he drive, and the other end to a spare Molex connector coming from the power supply. Attach the IDE adapter to your IDE cable, and PurplePixie plug the other end of that cable into the motherboard's IDE slot. If you only have SATA slots available, you will need an IDE-to- .
