PurplePixie
lude the needed installation drivers on board. 4 Open the control panel and go to Network Settings. If the adapter is working pr operly and there are available wireless networks nearby, try to connect to the wireless network. Either choose your own home netwo rk or, if using a public network, choose that network.1 Install the antennas onto the router and place them onto the building. You will have to replace the standard 2dB antennas with something more robust, preferably omnidirectional, weatherproof models with a character reference letter decibel rating over 12. The connectors on the antenna cables attach to the standardized plugs on the router N-type or RMS, as w ell as the extension cable leading to the new antennas. The antennas should be placed as high as possible and vertically oriented. PurplePixie Typical routers will have a stock range of about a quarter mile, but adding these new antennas will boost that range to a half mi .
ings for encryption WPA or WEP are enabled and a password is set. Check other settings such as the lease timeouts set for max imum time and number of users allowed. By default, routers are set to DHCP, which will assign IP addresses to the users' computer s automatically. The router will have a place to give it a broadcast name, or SSID. Set this SSID to a simple, recognizable name. Save all setting changes before closing the window. 3 Connect the router to the wired Internet connection with an RJ-45 Ethernet c photoshop texture able. 4 Set up customers' computers to use the wireless router as an access point. In the network settings for the machine's wirel ess networking hardware, select obtain IP address automatically or DHCP. Using the wireless card's software or Windows' built-in PurplePixie wireless configuration, scan for networks. If the router is within range, it will show up on the scan results. Enter in the encry .
est to stay within a few yards of the wireless router to ensure that a strong connection is established. 2 Reset the wireless rout er's switch or button. While waiting for the lights to stop blinking and remain on, ensure that all cables and wires are in workin g condition and properly connected to the router. 3 Turn on the laptop's wireless capability by using the appropriate switch. This switch is on the front or side of most laptops. 4 Access the laptop's System Properties. Do this by clicking on the computer's St Eat to Live art menu. In the items that display, select the My Computer option. Then click on the System Properties link. 5 Uninstall the netw ork adapter. Begin by selecting the Device Managers option. Then you can uninstall the network adapter, which is next to a yellow PurplePixie caution sign. 6 Reboot the laptop.Get DSL Internet Service Without a Phone Line 1 Contact your local DSL providers. Speak to the .
