PurplePixie
rn on the router and the modem to reset the Internet connection. If this does not generate positive results, connect the modem dir ectly to the computer to verify if there is Internet connection. Use an Ethernet cable to connect the modem to the LAN Local Ar ea Connection port of your computer. If an Internet connection is detected, the problem may lie on the router or other issues on your network devices such as the network card and the wireless router. If you do not detect Internet connection, there may be a free it books service outage in your place. 4 Use the HP Wireless Assistant program to troubleshoot problems with your wireless connectionwir eless devices. The program alerts you whenever the status of a wireless device changes so you know if you are still connected to a PurplePixie wireless connection or not. The program also allows you to control your wireless devices including your wireless card. Disable an .
nstructions to complete the installation.1 Connect the router to the modem with an Ethernet cable. The modem can connect to any on e of the Internet, WAN or WLAN ports on the router. 2 Plug in the modem and turn it on. 3 Plug in the router and turn it on after the modem connects to the Internet. 4 Connect the router to the computer you'll be using to set up the network. You can attach the cable to the Internet, WAN or WLAN port on the router. 5 Open your Internet browser and navigate to your router's configuration p design templates age. This information should have come with the router. For a D-Link router, for example, you would type 192.168.0.1 into the brow ser's address bar and hit Enter. 6 Enter the default username and password that came with your router. 7 Change the network's SS PurplePixie ID to the name by which you want to identify the network. 8 Turn on WPA or WPA2 to secure your network, and assign a security key. .
he card into the card slot on the side of your laptop. Wait until Windows displays the Found New Hardware message. 2 Insert the accompanying CD into the laptop. Doing so will prompt you to install any necessary drivers. 3 Reboot the laptop. Follow the card m anufacturer's instructions for configuring the card so that it matches the settings of the wireless network you will be connecting to. 4 Choose between infrastructure and ad hoc modes. Infrastructure mode means that your laptop and PC workstations will connect rust texture via wireless access point or base station. In ad hoc mode, the devices communicate via a channel number specified by you. 5 Enter the required WEP information, such as WEP key, when prompted. WEP is a wireless local area network's security protocol. You will PurplePixie know the WEP key if you were the one who set up the wireless network. Otherwise, speak to your network administrator. Be sure to u .
