PurplePixie
d a broadband card if you travel in remote areas and need Internet access while at these locations, andor if you require a redund ant connection to the Internet. Public safety agencies are good examples of having multiple means by which they can communicate vi a the Internet.Printing in Windows 7 and Vista 1 Ensure that the printer is on and that it is connected to the router. Log onto yo ur wireless network. 2 Click on Start, then Network. 3 Click on Add a Printer in the tool bar. Select Add a network, wirele font generator ss, or Bluetooth printer. 4 Select the printer once Windows detects it. Click Next. 5 Give the printer a name that you can reco gnize. If the printer is going to be your primary printer, click the Set as default printer check box. Click Next. 6 Press the PurplePixie Print a test page to confirm the printer has been installed correctly. Click Finish. 7 Open the file you wish to print. Click .
Double-click the Printers and Faxes icon. Select Add Printer. Click Next in the Add Printer Wizard. 11 Click Local print er. De-select the Automatically detect and install my Plug and Play printer check box. Click Next. 12 Choose Create a new po rt. Choose Standard TCPIP port if you know the printer's static IP address, then skip to Step 5. Select Local port if you kn ow the printer server path, and enter the Port Name. Skip to Step 6. 13 Click Next on the TCPIP Wizard. Enter the IP addres home icon s of the printer and click Next. Click Finish once Windows finds the printer on the network. 14 Select an appropriate printer driver, click Next. 15 Give the printer a name that you can recognize. If the printer is going to be your primary printer, click PurplePixie the Set as default printer check box. Click Next. 16 Choose to Share or Do not share the printer, according to your prefe .
tup 1 Attach the ESD strap to your wrist and clip the other end to a metal object to eliminate the danger of static electricity. 2 Turn off the computer and unplug the power cord. 3 Lay the computer on its side and remove the side panel. 4 Look at the hard dri ve and the optical drive to see if they are attached to the same cable. Separate Cables 5 Use the needle-nose pliers to move the j umper to the Slave position in the jumper block. The exact positioning will be printed on the hard drive's label. 6 Insert the h letter of recommendation format ard drive into an open drive bay and secure it using the screws that came with the drive. 7 Attach the middle connector of the cab le connected to the original hard drive to the new hard drive. Then connect a power lead from the power supply to the hard drive. PurplePixie 8 Put the cover back on the case, re-attach the power cord and turn on the computer. Same Cable 9 Verify that the jumper on the ne .
