PurplePixie
of an email address and password. Once the correct settings are saved, you will have Internet access through your wireless connect ion.1 Power off your computer. Remove the power cords, the monitor, the mouse and keyboard, and any other connections. 2 Carefully turn the computer over onto its right side and remove the case. Touch the computer chassis to ground yourself, so as to prevent s tatic electricity from damaging the computer's interior. 3 Locate the drives you should find them at the front of the computer, b nd dot bill of free form elow the CD or DVD drive and unscrew them from the drive bays. 4 Remove both hard drives from the computer and gently pull out th e power and ribbon cables. The power cable is the four-pin connector, and the ribbon cable, the 40-pin connector. If the power cab PurplePixie le is difficult to remove, wiggle the cable back and forth until its loose enough to remove it. 5 Check the jumper settings on bot .
the manufacturer or review the hard drive's documentation if you need more assistance. 6 If the jumpers are not set as master, use a set of tweezers to carefully remove the jumper from the interface. Replace the jumper so that it is correctly aligned with the master setting. 7 Plug the master end of the ribbon cables into each hard drive. The master end is the 40-pin connector on the far thest end of the cable. 8 Insert the power cable into each drive, respectively. Slide the drives back into their drive bays and sc how to install best free fonts to adobe photoshop rew them into place. 9 Confirm all connections are secure, then replace the case to your computer. Reattach any cords or periphera ls to your computer. Press the Power button. 10 Access your BIOS utility. The BIOS utility is a special software, accessible fro PurplePixie m your PC's startup screen, that will allow you to change your hard drive's settings. Your BIOS is responsible for detecting and c .
with the highest boot priority will be the one to load the operating system at startup. 13 Save your settings and exit the BIOS.1 Power on your laptop and wait for the system to fully load. 2 Ensure the AC adapter is connected to your laptop and plugged into a power socket. 3 Click the Start button and access All Programs. 4 Navigate to the HP folder, open it and click HP Battery Check. The HP Battery Check window displays the status of your battery.1 Click Start and type Toshiba Control panel. 2 Click icons download are white vista Advanced and then click Support Options. 3 Click RMI Configuration. 4 Remove the check box next to Enable RMI Account Acces s and click Apply. You have now disabled RMI access to your system by Toshiba technical support.1 Click on Start, then open t PurplePixie he Control Panel. 2 Select Performance and Maintenance. 3 Choose Back up Your Data from the available options. 4 Select Res .
