PurplePixie
ally fix file system errors if you want to automatically repair errors without first doing a deep scan for bad sectors. 6 Place a check mark in Scan for and attempt recovery of bad sectors to do a deep scan for bad sectors and attempt recovery of lost infor mation. 7 Click Start. If no boxes are checked, Check Disk will operate in read-only mode and report its findings without modify ing the hard disk.1 Carry out standard checks. Make sure all doors are closed firmly, the copier has paper installed in the right free romance books drawers and in the right quantity, and the toner cartridge does not need replacing. 2 Check the power supply. Check all connection s running into the machine. Check that the machine is not in energy saver mode. If it is, then press the Start button and allo PurplePixie w the machine to reset. If the Warming up message appears, wait a few moments and then try again. 3 Replace the toner if low. Th .
cover of the finisher. Lower the lever to release the lock and remove the stapler cartridge. Lower the guide holding the knob. Rem ove any jammed staples or replace if needed. Reinsert the stapler into the machine. 5 Reboot the machine. This occurs when the equ ipment cannot operate because of an error. The machine will recognize that this could be resolved by rebooting. Power off the mach ine, reboot and wait to see if the message has disappeared.Upgrading 1 Back up all data on the EIDE hard drive that you are replac css template ing. 2 Place the operating system install disk into the optical drive of the computer. 3 Power down the computer. 4 Unplug all cab les from the computer Power, USB, video, Ethernet, etc.. 5 Open the computer case. 6 Remove the EIDE hard drive and ribbon data PurplePixie cable from the computer. 7 Install the SATA hard drive in the bay that the EIDE hard drive occupied, reusing the screws to secure .
a cable to the back of the SATA hard drive. 10 Connect the power cable from the power supply to the power port on the back of the SATA drive. 11 Reconnect the power, video, keyboard and mouse cables to the computer. 12 Turn on the monitor and power on the comp uter. 13 Immediately upon boot, press the required key combination each computer may be different to choose which device to boot from. 14 Select the optical drive as the boot device and press Enter. 15 Allow the computer to boot from the operating system i glass texture nstall disk. 16 Follow the onscreen instructions to install the operating system on the computer. Install drivers as required by y our operating system of choice. 17 After installing your operating system, power down your computer and close the case. This step PurplePixie is left for last in case of loose connections.1 Locate your Dell computer's service tag on the bottom, back or side of your comput .
