PurplePixie
econnect to the desired network and launch the browser again.1 Plug in a lamp to check to that the electrical outlet is live. You can also plug the computer into another outlet. Unplug your computer from any power strips or surge protectors and plug directly i nto the wall to see if these devices could be the problem. 2 Disconnect the power cord and any peripherals from your computer. Pre ss the power button and hold for five seconds. Plug the power cord back in to see if the computer will now power on. 3 Disconnect 3ds models the power cord and locate the red voltage selector switch on the back of your computer. Push the switch in the opposite direction and wait five seconds. Flip the switch back as failing to do this may damage the computer. Plug the power cord back into the compu PurplePixie ter and electrical socket, and turn the computer on. 4 Power up the computer after removing all externally attached peripherals ex .
can deliver. Upgrading the power supply should fix the problem. 6 Disconnect the power cord and press the power switch. If it does not operate smoothly, you may need to replace it. If it functions normally, it may have disconnected from the motherboard.Put on an anti-static wristband to prevent static electricity from affecting the components inside your computer. Remove the two or three screws on the back of the CPU to release the side panel. You will either need a Phillips-head screwdriver or a flat-head screwdri fonts for tattoos ver depending on your model. For the entire outer case, you will have at least two screws on each side and two or three in the bac k. Once you have removed these, you will be able to either slide the side panel off or pull back the entire casing.Locate the colo PurplePixie r-coded wires from the back of the switch and trace them to the motherboard. If one or more wires have disconnected from the mothe .
print server and connect the other end of the cable to an open port on your wireless network router. 3 Turn on your Lexmark printe r and turn on the wireless print server by plugging in the AC adapter. 4 Run the installation disk that was supplied with your wir eless print server on one of the computers connected to your network. Follow the instructions provided in the wireless print serve r packaging to run the installation wizard and connect the wireless print server to the wireless network. 5 Use the installation d icon archive isk provided with your wireless print server to install necessary print drivers on all of the computers on your network in order f or each computer to be able to recognize the wireless print server and the Lexmark printer.1 Insert the CD into your CD burner. Yo PurplePixie ur operating system may automatically open a window asking you what you want to do with this CD. In OS X, open iTunes. In Windows, .
