PurplePixie
re for professional use that required very fast access. IDE and EIDE are interchangeable and connect the same way to your computer . SATA hard drives are a newer technology and connect to your computer with a different interface that is not interchangeable with other hard drive types. Replacing a Hard Drive Your hard drive contains your operating system and all of your data. When you repl ace your hard drive, you have to install an operating system again and copy all of your data off of your old hard drive to put on html and css your new hard drive. If you only have one type of connection for a hard drive, you can only replace the hard drive with that type. If you have a computer that has an EIDE and a SATA connection, you can take out the old SATA hard drive and connect a new EIDE dr PurplePixie ive to your computer. Otherwise, your only choice is another SATA drive.1 Insert your thumb drive into a USB port on your computer .
the file that you want to record to the thumb drive. 5 Click and drag the file over to the drive window, and drop it there. A tra nsfer progress window will appear. 6 Wait until the status bar reaches 100 percent, then close all windows. 7 Right click on the d rive icon looks like your thumb drive with a green arrow on your task bar and choose the option Safely Remove Hardware. 8 Foll ow the prompts on the window that appears, and remove your flash drive from your USB port. The data can now be used on any compute fabric texture r with a USB port.1 Launch Windows Registry Editor from the Start menu. Click the Run... tool from the Start menu and type rege dit without the quotes. Press Enter. 2 Navigate to the following path in the left pane of the Registry Editor: HKEY_LOCAL_MACHI PurplePixie NESYSTEMCurrentControlSetControlSession Manager. 3 Right-click DisableScandiskOnBoot on the right pane. Select Modify. 4 T .
e side of your case locate the slots under your CD ROMS where you hard drives will be installed. 2 Place your two SATA hard drives in to their respective slots and screw them in to place. 3 Set the drive you want to be primary as the master drive by placing th e pin in the first position. If you are having trouble locating the master position, consult your hard drives instruction manual. 4 Set your secondary drive as a slave drive by placing the pin in the third position. 5 Connect your SATA cables to the back of ea house model ch drive, then connect them to your motherboard via the SATA expansion slots. 6 Close and secure your computer case, your SATA har d drive installation is now complete. Configuring BIOS 7 Restart your computer and press the F8 key to enter BIOS setup. Some co PurplePixie mputers will have different keys for entering setup such as Delete. If F8 is not the correct key, watch your monitor as your c .
