PurplePixie
ond storage device on the computer.1 Buy a SATA-to-USB hard drive enclosure that supports the data transfer rate of your SATA driv e. For instance, if your hard drive transfers data at 1000mbps, you want to buy a hard drive enclosure that will support a 1000mbp s or higher data transfer rate. 2 Remove the hard drive cage from the hard drive enclosure; the hard drive cage is removed from th e rear of the hard drive enclosure and should slide right out when you pull it. If not, consult the manual of your hard drive encl egg diet osure for instructions as enclosures come in various shapes and sizes. Place the hard drive into the hard drive cage. 3 Connect th e power cable and SATA cable from the hard drive enclosure to the SATA hard drive. Replace the hard drive cage into the hard drive PurplePixie enclosure. 4 Connect the USB cable from the hard drive to the computer. Go to My Computer and check the external hard drive to se .
hout quotation marks in the command prompt and press Enter. 3 Scroll down the list until you locate an item with the title Wire less Network Connection or similar. The physical address of the wireless adapter is shown below the Description line. The add ress is six pairs of letters and numbers, such as 00-25-D3-5A-BD-D7.1 Click the Start menu and choose the Run option. Enter the letters CMD into Run and press OK. 2 Enter the text regsrv3, followed by a space and the line %systemroot%. Immediat 3d chess board ely after the second % symbol, type in system32. All of this text is the main prefix that you will need to use for each entry. 3 Type the letters vbscript.dll after the first main prefix line and press the Enter key to enter the first command. 4 Enter PurplePixie another line of prefix text followed by jscript.dll to make the second command. Make a third command with the main prefix follow .
wshext.dll and press Enter. Type in the final line with the prefix followed by wshom.ocx and press Enter. 7 Restart your c omputer to allow the script additions to take effect.1 Turn off your computer, unplug it, and discharge any static electricity on your body by touching a metal part of its chassis. Open the case. 2 Determine whether your hard drive uses ATA or SATA. ATA hard d rives have a long data connector on the back with two rows of 20 pins as well as a power connector with four large pins. SATA hard google font drives have two thin connectors with metallic fingers on them--a wide one for power and a narrow one for data. 3 Place the hard drive in an empty, appropriately-sized bay in the chassis. Screw it in with screws provided by the hard drive manufacturer. 4 Con PurplePixie nect a power cable from the case's power supply to your hard drive. The correct kind of power cable should fit properly and go in .
