PurplePixie
o begin with -- to avoid setting it too low -- which is enough to make a noticeable difference. 5 Click OK, then close the Regis try editor. 6 Shut down your computer normally.Size SATA is a much smaller-sized cable than the IDE; the IDE cable is a 40-pin rib bon cable, whereas the SATA is a 7-pin cable. Speed The SATA drive will have a much faster connection than the IDE drive: SATA spe eds range from 150 MBs per second to 300 Mbs. IDE speeds range from 5 MBs per second to 133 MBs. Case Cooling Since IDE cables are css layout much wider than SATA cables, they obstruct airflow in a computer case, making it hotter, which can damage you computer. Simplicit y Some IDE drives require that you switch the jumper caps on a motherboard link-in resources for them to function properly. With PurplePixie SATA drives, no jumper caps need to be changed, making it much simpler to install. Amount of Connections Although SATA drives are .
ter. This will open the Microsoft Malicious Software Removal Tool. 2 Click Next, select full scan, and click Next again. 3 Finish the scan, and follow the on-screen prompts to remove your computer bug. Use your Anti-Virus programs 4 Shut down and resta rt your computer while holding down the F8 key on your keyboard. This will open the Advanced Boot Options menu. 5 Use your down arrows, and select Safe Mode 6 Log in to the computer through Safe Mode, and click OK to proceed when prompted to do so. 7 O brick texture pen your antivirus program and run a full scan.1 Open the Web browser on your PC. 2 Enter your router's IP address into the addres s bar. Usually the IP address is 192.168.1.1, but if that doesn't work, refer to your router's manual for the IP address. 3 Enter PurplePixie your usename and password when prompted to enter the router's settings. If this is the first time the router is being accessed, us .
the encryption types listed. 6 Choose a password and click the button to generate the WEP codes. This should make the page refresh and display a series of numbers, usually around four or five. 7 Record the numbers that appear. You will need these numbers to co nnect wireless devices to your network.1 Place your Windows XP disc in your computer drive and restart. Look for the message Pres s any key to boot from CD and press the space bar on your keyboard. This will load your Windows Setup Screen. 2 Press R on your 3d dna model keyboard to choose the Recovery Console. 3 Enter your admin password when you are prompted to do so. The Recovery Console opens. You are now at the command prompt. 4 Type the following commands and press Enter after each:md tmpcopy c:windowssystem32config PurplePixie system c:windowstmpsystem.bakcopy c:windowssystem32configsoftware c:windowstmpsoftware.bakcopy c:windowssystem32confi .
