PurplePixie
our Internet is connected. If not, then skip to Section 3. 3 If your laptop has an Ethernet slot, plug your Ethernet cord into the back of your computer and one of the slots of your cable modem. If not, plug the USB network adapter into your USB slot and plug the Ethernet cord into the adapter and the back of your cable modem. 4 Windows will automatically detect your new hardware and it may even prompt you to start your Wireless Network installation. You can also check your Internet connection at this time as you w blood type diet ill be connected directly to the Internet. To connect wirelessly, move on to Section 3. Connect Wirelessly 5 Turn off your cable o r DSL modem and your router. Connect your wireless router to the modem using your Ethernet cord. Use the Internet, WLAN or WAN slo PurplePixie t on the router for this connection. 6 Plug in your router and your modem. When the light on your router labeled Internet, WAN or .
Internet browser and type http:192.168.1.1 into your browser. This will take you to a prompt for your user name and password. 9 Set your networks name and password. At this time you may have to restart your computer. Disconnect the cable from the router to your computer. Upon restart, you should be able to connect to your wireless network.1 Find an available USB port on your computer. If you do not have one open, you can remove the device currently plugged in and reconnect it to your hub after the hub is connect terminator models ed. 2 Plug the cable running out of the hub into the open USB port. Reconnect the device you disconnected into one of the availabl e slots on the USB hub. 3 Insert the hub's driver installation disk if one came with the device. Although most hubs are plug-and-p PurplePixie lay devices, some do require you to install a driver. The driver installation wizard launches after you insert the disk. Follow th .
s driver installation CD. Wait for the installation wizard to launch, then follow the prompts, leaving all the settings as the def ault options. Finish the prompts and the installation finishes. You can now use your USB microphone with the USB hub.1 Attach the AirPort to your DSL or cable modem using an RJ-45 Ethernet cable. Power both units down, reboot the router, wait 45 seconds and th en reboot the AirPort. You will want to connect it to the WAN port on the AirPort, not one of the numbered LAN jacks. 2 Confirm yo my fonts ur PC has wireless capabilities by launching the Start menu lower left corner of the screen and right clicking My Computer. Sele ct Properties and then Hardware. Double click on the Device Manager, which lists installed hardware. If there is a wireless card, PurplePixie youll see it listed under Network Adapters. 3 Install the AirPort Utility software on your PC. If you have the CD that came with t .
