PurplePixie
nd 253 of each drive attribute, where 1 is low and 253 is high. Higher numbers are better than low ones in the ratings. 4 Note any ratings that seem far out of normal range and pay particular attention to ratings that might indicate a failure is imminent for example, high temperature, high error rates, large percentage of bad disk blocks. If there are several out of range indications, you should consider backing up your data and replacing the hard drive.1 Click on the Start button on the lower right-hand corner website templates free of the computer screen. 2 Click on the Control Panel option. This will give you access to a number of programs and devices your computer uses, such as your speakers, printers and various security programs. This is also where you can access your firewall. 3 PurplePixie Choose the security option by clicking on the link. 4 Click on the button that says Turn Windows Firewall on or off if your fire .
of your firewall to Recommended. This will keep the firewall on when you turn on your computer.Check your router's clients table 1 Find out the address of your router on your network so you can connect to its administration page. To do this in Windows, open a command prompt you can find this in Accessories under All Programs in the start menu and type ipconfig. This will list s everal different IP addresses. Write down the one labeled Default Gateway. This is your router's IP Address. 2 Open a browser an free textures d type the IP address you wrote down into the address bar. This will take you to your router's administration page. You'll need to know the password to access it. If you have not yet set a password, it is set to a factory default. This value can sometimes be f PurplePixie ound on a sticker on the router. If you can't find it, visit your router's manufacturer website. It will be listed there somewhere .
u have, the DHCP clients table could be buried somewhere in various sub-pages of the administration page. If it is, it is usually on a page called Local Network or LAN. If you can't find it, visit the manufacturer's website and search for information on th e DHCP clients table. 4 Check out the list of computers. Are there more than you think there should be? Keep in mind that you may have a smart phone or game console that uses your network. If there are more than there should be, someone is on your network with terminator models out permission. Consider securing your network with encryption such as WPA or WEP to keep unwanted intruders off of it. WPA and WE P are what routers that require a password to connect to use; they effectively lock out anyone who doesn't know your password. You PurplePixie r manufacturer's website will explain how to set this up.1 Click the hyperlink in the Resources section below to open your 2Wire g .
