PurplePixie
ed N-connector into the can interior.The small wire serves as the actual antenna inside the can. Assembled, the connector is secur ed with either an inside bolt or four exterior screws, depending on the type of n-connector used. The total length must be as clos e as possible to 1.21 inches into the can. The wire and connector when installed are perpendicular to the side of the can. The Cab le to the Computer Most cantenna designs use a coaxial cable to make the final connection to the computer. However, youtube.com we maya 3d b series Amateur Logic converts a wireless USB router into the design to use the more robust USB connection instead of coaxial cab le. USB cable has the advantage of being as long as 16 feet without any signal degradation; coaxial cable loses signal strength be PurplePixie yond six feet.The Amateur Logic conversion to USB also eliminated the need for a dedicated WiFi card for the computer. Instead, an .
connector arranged in 20 rows of paired pins and is usually colored blue. There is usually printed text near the connector; such a s IDE-0 or ATA-1 or the word PRIMARY. IDEATA History IDEATA hard disks were introduced in 1986 as an alternative to SCSI drive t echnology. All SCSI adapters controled up to eight devices, which made the adapter expensive. IDE drives had most of the control c ircuits on the drives themselves, making the controller inexpensive and simple. Device Assginment Usually, a PC comes equipped wit 80 10 10 Diet h two IDE channels; one primary and one secondary, making it possible to attach up to four drives. The Primary Master is the first drive on the primary IDE channel and usually contains the operating system, if not the whole computer system. Misconceptions The PurplePixie primary IDE channel is not always required to boot the system. Add-in cards and device interfaces such as SATA can also be used .
for booting the system but for having more advanced IDE features than secondary IDE channels. It's recommended that¡ªfor PCs usin
g more than one IDE drive¡ªthe fastest, most-advanced device should be connected to the primary channel as master.1 Open the Star
t menu. 2 Type cmd and press Enter. 3 Type tracert
